V-MD241, 1920x1080 Resolution Desktop Monitor with Modular Inputs and Network Control

• Swap and interchangeable video modules

• Native 1920 x 1080 resolution screen

• Two available input slots

V-MD241 specifications

Panel	Number of Panels	1
	Panel Size	24” Diagonal
	Resolution	1920 x 1080
	Aspect Ratio	16:09
	Active Area	531.36 x 298.89 mm
	Type	LCD Panel
	Brightness	300 cd/m²
	Contrast	3000:1
	Color Gamut	YUV, RGB
	Viewing Angles (CR>=10)	178° x 178°
	Backlight type	LED
	Adjustable Backlight	Yes
Features	Video Formats	1080p/1080i/720p/625i/525i
	Loss of Input Curtain	Yes
	Color Temperature	D65, D55 and D93
	H/V Delay	Yes
	Under scan	Yes
	IMD Functions	Yes, via menus
	False Color	Yes
	Peaking Filter	No
	HDMI CSC Auto	With HDMI Module
	HDMI Ratio Auto	With HDMI Module
	Pixel to Pixel	Yes
	Test Signals	No
	Pre-set Gamma points	No
	Self-Sensing	Yes
	Modular Input Slot	2
	Re-clocked/Re-Shaped	Yes
Video Input Connectors	CVBS	Yes
	YPbPr	Yes
	SD-SDI	Optional Module
	HD-SDI	Optional Module
	3G-SDI	Optional Module
	HDMI	Optional Module
	DVI-I	Optional Module
	Optical	Optional Module
Video Output Connectors	CVBS	Yes
	YpbPr	Yes
	SD-SDI	Optional Module
	HD-SDI	Optional Module
	3G-SDI	Optional Module
	HDMI	No
Control Inputs	Embedded Audio from SDI	Yes
	Input Status Display	Yes
Mechanical	Controls on front Panel	Yes
	User-Defined Function Buttons	Yes
	RotoMenu™ Control	No
	Pivot Angle	Yes
	Handles/Rack Ears	Yes
Power	Voltage	12 VDC
	Consumption	3.5A @ 12VDC (42 W)
	Power Switch	Yes
	Connector	4-Pin Female XLR
Compliance	Compliance	CE approved
Environmental	Operating Temperature (C°)	32°F to 104°F
	Storage Temperature (C°)	-4°F to120°F
	Rack Unit dimensions	22"(W) x 14.66" (H) x 1.5 (D)
	Weight (Main Body)	11.05 lbs
	Protective screen	No
	Vesa Mount Pattern	200/75mm

False Color Filter

The False Color filter is used to aid in the setting of camera exposure. As the camera Iris is adjusted, elements of the image will change color based on the luminance or brightness values. This enables proper exposure to be achieved without the use of costly, complicated external test equipment.

To best utilize this feature, you must understand the color chart and have a basic understanding of camera exposure. Normally, when shooting subjects like people, it is common practice to set exposure of faces to the equivalent of approximately 56 IRE. The False Color filter will show this area as the color PINK on the monitor. Therefore, as you increase exposure (open the IRIS), your subject will change color as indicated on the chart: PINK, then GREY, then a few shades of YELLOW. Overexposed subjects (above 101 IRE) on the monitor will be shown as RED. In addition, underexposed subjects will show as DEEP-BLUE to DARK-BLUE, with clipped-blacks indicated with a FUCHSIA-like color. Lastly, the color GREEN is used to indicate elements of the image that are approximately 45 IRE. This represents a "neutral" or "mid-level" exposure commonly used for objects (not people).

IMD and Tally

Use the "Text Enable" function to turn the MD Text feature ON. This will cause the "Text String" to appear on the lower portion of the screen. This provides the user with a 16 character on-screen text string. The color, background (opacity), and alignment of text can also be managed by the operator. This same menu allows control of Tally Source. Tally lights (both LED and on-screen) can be enabled/disabled and also set to match "Text String" color.

Optional Input Modules (Type A modules)

MD-3GE - 3G/HD/SDI Input Module with Loop-Through
MD-HDIx2-A - Two-channel HDMI Input Module
MD-DVII-A - DVI-I Input Module

» Click here for more info on Optional Input Modules
* Input modules are optional and available at additional cost. More input modules to be offered in the future.